Stainless Steel Door

Metal entrance door

Door leaf is made of two steel sheets with embossed surface. Inside there is “honeycomb” insulation and additional metal profiles for reinforcement. Door leaf thickness depends on the different models and could be 50mm. The door leaf is covered with heat
INQUIRY
Description Features Technical data

Door leaf is made of two steel sheets with embossed surface. Inside there is “honeycomb” insulation and additional metal profiles for reinforcement. Door leaf thickness depends on the different models and could be 50mm. The door leaf is covered with heat printed PVC foil.

 

Door Frame: The door frame is 90mm thick, covered with heat printed PVC foil and has one side architraves.

 

Locking: 3 way locking directions – Top, bottom and side with 12 locking points in total.

 

Door Set Includes: Door leaf, door frame with one side architraves, lock body, lock cylinder with 5 keys, inox handle, peephole, rubber seals for the door leaf and door frame, or hidden hinges and mounting pins.

 FEATURES
Type entrance door
Model JWG-SD
Material for door frame reinforced metal
Material for door leaf reinforced metal
Dimensions of door 960/2000 mm.
Hole in the wall 980/2030 mm.
Door leaf thickness 50 mm.
Insulation  yes
Lock 3 way locking directions
Lock cylinder protectors yes
Threshold yes
Peephole yes

Three locking directions- with 10, 12 or 15 lock points in total. This type of locking is being performed by metal spikes that come into the frame from three directions: up, down and side, there is also an internal lock with a spike.

      

Shemi 093 G 1 1

  

1. Insulation ;

2. Extra ribbing with metal profiles;

3. Peripheral locks with metal spikes;

4. Locking system;

5. Spy hole;

6. Sheet metal with beautiful designs;

7. Covered with heat printed PVC foil or powder coated.

Review